Façade thermal insulation
ROCKWOOL FRONTROCK SUPER
A dual-density rigid slab for external wall systems. Due to its high density top side, it can be used for thin coat systems, as well as also for thicker coat systems.
Rockwool Frontrock Super is a dual density slab for external wall systems with excellent thermal conductivity performance and high sound absorption. It can be used for rendering systems with all kind of finish coatings – light or heavy, thin or thicker. The advantage of Rockwool Frontrock Super compared with lamella is, that the outside surface, which is visibly marked, is highly compressed. While supported with mechanical fixings, Frontrock Super can be suitable also for extremely heavy loads, such as appear to be various thicker coated rendering systems. Due to its excellent lambda value (0,036 W/mK), we achieve a 15% better U-value for the external wall, as if we were using the same insulation thickness of the standard EPS or mineral wool lamella.
Rockwool Frontrock Super is an excellent thermal insulator. It is not flamable when exposed to open flame and does not generate smoke nor burning droplets. It helps to prevent spread of fire. Frontrock Super has also very good acoustic properties and helps to reduce the noise transmission from outside into the dwelling units. It is water repellent through the whole section and at the same time diffusion open for the vapour transmission.
Rockwool Frontrock Super slabs are being produced in dimension 1000 x 600. We deliver the product in packs, stacked on small format pallets, covered with PE plastic cover hood.
- Compliance:
EN 13162:2012 + A1:2015 - Fire Classification:
non-flammable (Euro Class A1) - Thermal Conductivity:
λD = 0.036 W/mK - Compressive stress at 10% relative deformation:
CS(10) ≥ 20 kPa - Tensile resistance to a force perpendicular to front surfaces:
TR ≥ 10 kPa - Full coed:
MW-EN 13162-T5-DS(70,-)-DS(70,90)-CS(10)20-TR10-PL(5)250-WS–WL(P)-MU1 - CE-certificates:
1390-CPR-0255/10/P; 1390-CPR-0256/10/P; 1390-CPR-0168/09/P; 1390-CPR-0452/16/P
Product range and ancillaries
Width | Length | Thickness | Thermal resistance | Area/Pack | Area/Pallet |
mm | mm | mm | m2K/W | m2 | m2 |
600 | 1000 | 80 | 2.20 | 1.80 | 36.00 |
100 | 2.75 | 1.80 | 28.80 | ||
120 | 3.30 | 1.80 | 21.60 | ||
140 | 3.85 | 1.20 | 19.20 | ||
150 | 4.15 | 1.20 | 19.20 | ||
160 | 4.40 | 1.20 | 14.40 | ||
180 | 5.00 | 1.20 | 14.40 |
Dimensions
No posts found