Save 10%
Gun mounting foam and sealing foam with reduced expansion rate and excellent thermal and acoustic insulation. Provides superior performance and economical application.
It can be purchased in two variants. Soudafoam Maxi and Soudafoam Maxi -10°C ( The "winter" formulation allows working at low temperatures down to -10°C.)
Properties:
- Excellent adhesion to building substrates such as masonry, brick, concrete, stone, wood, PVC, aluminum, including powder coated, glazed surfaces, etc.
- High performance and parameter stability
- Short curing time
- Precise dosing
Application:
- Sealing when installing window and door frames, window sills, roller shutters, stair treads, etc.
- Filling and insulating pipe and cable penetrations, components of central heating systems
- Filling and sound insulation of partition walls, prefabricated elements in frame constructions
- Thermal and sound insulation of floors, attics, roofs, air conditioning systems
- Filling of wall and ceiling joints
Technical designation:
Method of application:
- The substrate must be clean, free of grease and loose dirt (dust, etc.)
- Immediately before applying the foam, moisten the substrate generously with water
- The can should be at room temperature,
- Shake the can vigorously approx. 30 times immediately before starting work
- Fill the working area from below in a slow, even motion, filling it only partially and leaving space for the foam to expand
- The foam layer should not be thicker than 3 cm before curing. Larger fills larger gaps in layers.
- Do not apply the next layer until the previous layer has hardened and been moistened with water
- After curing, remove the stiffeners, cut off the excess foam with a sharp knife and protect from sunlight. Protect from sunlight.
Standards and certificates: National technical assessment: ITB-KOT-2017/0119
No posts found
