Atlas SAH-NS | thin-layer silicone-silicate render available in 400 colours

Silicone-silicate render for a facade. 400 colors available.

Atlas SAH-NS is a thin-coat render for the finishing facade coats, but also for interiors. It has a decorative spotted texture. It is great solution when it is crucial to maintain high vapour permeability, dirt resistace, high adhesion. Hybrid render SAH-NS works perfectly on buildings made of cellular concrete, walls of old buildings, swimming pools or kitchens.

Is silicone-silicate worth it? The benefits of using silicone-silicate render:

• Highly vapour permeable;
• Low water absorptiveness;
• Resistant to dirt;
• High adhesion to the substrate;
• 400 colours in accordance with Renders and Paints SAH Colour Scheme;
• enables to achieve dense and very clear texture up to 1.5 mm or 2.0 mm thick;
• spotted texture.

Where to use silicone-silicate render:

• Thin-coat render for the execution of the finishing coats with a decorative spotted texture
• For indoor and outdoor use
• Recommended as a finishing coat during the insulation of the buildings with the use of EPS or XPS boards as well as mineral wool panels
• For façades where it is crucial to maintain high vapour permeability of the partitions

Types of rendered buildings

• detached houses
• apartment buildings
• industrial buildings
• public access buildings
• buildings made of cellular concrete, walls of old buildings, swimming pools or kitchens

Types of substrates

• concrete
• traditional plasters on walls made of bricks, blocks and ceramic, cellular concrete or silicate hollow bricks
• plasterboards
• base coats of thermal insulation systems with EPS and XPS boards or mineral wool

Render Properties

Up-to-date thin-coat render, based on an unique combination of organic and mineral binders.

Characterised by very high vapour permeability assisted by low water absorptiveness and, typical for pure silicone renders, great resistance to dirt.

Has the ability of self-cleaning during rainfalls:
Does not require frequent preserving operations.

Bio-Protection:
Creates unfavorable conditions for fungi and algae growth due to its low water absorption and acid-alkaline reaction.

Elasticity and strength:
Formula, which ensures better elasticity and resistance to impacts, leads to the compensation of tension when the surface of the render is hit, making it consistent and not chipping off.

Color durability:
Advanced technology provides colour durability thanks to the application of modern pigments, computer controlled system of dozing and permanently supervised manufacturing process – the render keeps its initial colour, is more resistant to bleaching and UV rays.

Environmentally friendly:
Render recipe was designed regarding the sustainable development aspects: maximally reduced amount of volatile organic compounds and use of natural fillers only.

Resistant to cracking:
Increased resistance, achieved due to the presence of dispersed microfibers that reinforce the render in the entire volume – render is protected against possible cracks caused by the tension and alternate surface heating and cooling.

Consumption of silicone-silicate render

Average consumption (depends on a substrate and render type):
» ca 2.5 kg for 1m² for thickness up to 1.5 mm
» ca 3.0 kg for 1m² for thickness up to 2.0 mm
The exact consumption volume can be established following a test carried out on the rendered surface.

Render choice depending on the environment conditions