Atlas GIPSAR UNI | white gypsum finishing coat (app. 2 mm)

Atlas GIPSAR UNI  - white gypsum finishing mix - C6/20/2 type for gypsum finishing coats the perfect substrate for painting and wallpapering for filling defects of wall and ceiling surfaces. It is manufactured as a dry mix of anhydrite flour, lime filler and modifying agents of new generation.

• Increased hardness – better mass setting and better primer and paint absorption (enables easy grounding both with sanding paper and wire cloth.
• Easy spreading over the substrate – due to reduced absorption of water from the mass.
• Enables more effective covering with paint – due to enhancement with polymer additives, it is a perfect substrate for modern paints.
• Creates uniform, strong and smooth surface for painting or wallpapering.
• consumption: 1 kg/1 m2/1 mm layer thickness
• max. single layer thickness: ca. 2 mm
• ideal spreading upon substrate
• ective paint coverage
• snow-white colour
• product based on natural white gypsum
• for internal use only
• types of substrates - concrete, aerated concrete, gypsum, cement plasters, cementlime plasters and gypsum plasters.
• Types of finishing layers - paints coating and wallpapers.
• Resistant to cracking resulting from contraction during drying.
• High water retention – allowing to retain appropriate amount of water in the mix, necessary for proper setting.
• The coat is snow-white in colour – enables effective covering of the surface with paint and to reduce its consumption.

Consumption

The average consumption is at 1 kg of mix/1 m2/1 mm layer thickness.

Packaging

Paper bags: 20 kg
Pallet: 1080 kg in 20 kg bags