Hand-applied gypsum finish for interior use, in rooms with normal air humidity, as well as in kitchens and bathrooms. Recommended for application on ceilings and walls of bricks, blocks, hollow blocks and other similar ceramic or silicate elements; concrete and aerated concrete substrates. Used as well for finishing the wall openings during the installation or replacement of windows, doors and window sills; filling larger holes (up to 3 cm in depth) and filling chases in walls and ceilings. It is manufactured as a dry mix based on synthetic gypsum with mineral fillers and modifiers.
- manual plastering of walls and ceilings
- optimum open time (120 min.)
- wide range of application
- high coverage
- for ceilings and walls of bricks, blocks, hollow blocks and other similar ceramic or silicate elements; concrete and aerated concrete substrates. Types of finish – gypsum finishing coats, ceramic tiles, paint coats, wallpaper.
Main characteristic
- Layer thickness: 8 – 30 mm
- Bond strength: ≥ 0,3 N/mm2
- Consumption: ca. 0.85 kg/1 m²/1 mm of layer thickness
- Packaging: 25 kg
Properties
- One-coat plaster – economical, easy and fast to apply; does not require additional finishing, as the obtained surface is already flat and very smooth.
- Wide range of applications – minimum plaster thickness - 8 mm; maximum plaster thickness on ceilings is 15 mm, and on walls - 30 mm.
- Optimum working time of 120±15 minutes – gives plenty of time to apply the material and finish the surface.
- High coverage – significantly better than in the case of traditional cement or cement-lime plasters.
- Resistant to cracking caused by shrinkage during setting and drying.
- Ensures favourable air properties in rooms – has a beneficial effect on the health and well-being of the inhabitants.
Material consumption
The average material consumption is ca.0.85 kg of material/ 1 m2 /1 mm layer thickness.lied product
Packaging
Paper bags 25 kg.
Pallet 1050 kg in 25 kg bags.
No posts found
Also bought
