Atlas RAPID | ready-to-use gypsum-polymer plaster (up to 3 mm)

ATLAS GIPS RAPID - ready-to-use polymer-based finishing coat – for walls and ceilings, for interior use. Suitable for hand or machine application.

• ready-to-use
• layer thickness up to 3 mm
• optimum hardness
• hand or machine applied
• bright white
• consumption: 1 kg/ 1 m2/1 mm
• layer thickness: max 3 mm
• adhesion: min. 0.3 N/mm2
• drying time: ca 6 h
• for concrete, aerated concrete, gypsum plasters, cement and lime-cement plasters, plasterboards
• Types of finish: paint coats, wallpaper

Properties

• Can be applied in very thin coats – makes it possible to adjust the amount of mate-rial applied to substrate properties and reduce material consumption.
• Very fine grain size – makes it possible to achieve a very smooth surface, perfect for painting and application of wallpaper.
• Excellent adhesion – thanks to the addition of polymers.
•  Flexible and crack-resistant – the finishing coat is resistant to cracking during set-ting, drying and use as the hardened material.
•  Easy to paint – uniform, bright white finishing coat is easier to paint and guarantees reduced paint consumption and lower cost of painting.
• Convenient to use – the material is ready to use, so any unused material can be left in the container and used at a later date within its shelf life, i.e. within 12 months from the date of manufacture.

Consumption

The average consumption is ca. 1.0 kg of the material for 1 m2.

Packaging

Plastic containers: 25 kg
Pallet: 800 kg in 25 kg containers.