ATLAS GEOFLEX EXPRESS - NEW glue for tiles. It's manufactured in the form of dry mix of highest quality cement binder, aggregates and special composition of natural and synthetic modifying agents.
The main characteristics
- foot traffic and grouting just after 2 hours
- for installation of ceramic and natural stone tiles, porcelain-gres and mosaic
- for application in communication routes, bathrooms, balcony and terraces
- erfect spread and no slip even with large tiles
- for critical substrates e.g. old tiles, terrazzo, plasterboards, damp-proofing, floor heating, concrete and OSB
- wide range of mix water – consistency adjusted to the needs
- 2 up to 15 mm layer - for floating, thin- and thick-coat application
- application in temperatures from +5°C up to +35°C
- Open time: min. 20 minutes
- Floor heating: after 7 days
- frost resistant
- for interior and exterior
- for residential buildings, public access, educational, office and healthcare facilities, commercial and service buildings, sacral buildings
Unique gel technology
ATLAS GEOFLEX EXPRESS contains the unique siliceous gel technology. The siliceous gel offers exceptional ability of water retention which ensures full cement hydration, regardless the cladding type in use.
Advantages
- Wide range of adhesive thickness (2-15 mm)
- for small, medium and large sized tiles (≤ 0.25 m²) and greater edge length ≤ 100 cm
- No cladding slip – enables installation of the cladding from top to bottom with no need of support at the fixing stage
- No shrinkage of the adhesive underneath the tile
- Resistant to changing atmospheric conditions.
Use
More information about installation area, substrate types and technical data you can find in Technical Data Sheet in "ATTACHMENTS"
Consumption
| Tiles size [cm] | Place of application | Recommended notches size [mm] | Consumption [kg/m3] |
|
2 x 2 |
wall | 4 | 1,3 |
| floor | 4 | 1,3 | |
|
10 x 10 |
wall | 4 | 1,3 |
| floor | 6 | 2,0 | |
|
15 x 60 |
wall | 6 | 2,0 |
| floor | 8 | 2,5 | |
|
20 x 25 |
wall | 6 | 2,0 |
| floor | 8 | 2,5 | |
|
25 x 40 |
wall | 6 | 2,0 |
| floor | 8 | 2,5 | |
|
30 x 30 |
wall | 6 | 2,0 |
| floor | 8 | 2,5 | |
|
30 x 60 |
wall | 8 | 2,0 |
| floor | 10 | 2,5 | |
|
40 x 40 |
wall | 8 | 2,5 |
| floor | 10 | 3,0 | |
|
50 x 50 |
wall | 8 | 2,5 |
| floor | 10 | 3,0 | |
|
tiles – slab type*, e.g. 20 x 90 or 15 x 100 |
wall | 8 | 2,5 |
| floor | 10 | 3,0 |
Average consumption of adhesive shown in table below is applicable for application on even substrate. Substrate irregularities are increasing the consumption of the adhesive mortar.
Packaging
foil bag 25 kg
48 bags / pallet
Geoflex products comparison
| Product | GEOFLEX EXPRESS highly flexible rapid set gel adhesive |
GEOFLEX highly flexible gel adhesive |
GEOFLEX WHITE highly flexible gel adhesive |
ULTRA GEOFLEX highly flexible deformable gel adhesive |
| TECHNICAL DATA | ||||
| Standard | PN-EN 12004+A1:2012 | |||
| CLASS | C2FT | C2TE | C2TE | C2TE S1 |
| BONDING STRENGTH (N/mm²) | ≥ 1.0 | ≥ 1.0 | ≥ 1.0 | ≥ 1.0 |
| MIN / MAX ADHESIVE THICKNESS (mm) | 2-15 | 2-15 | 2-15 | 2-15 |
| ADHESIVE PREPARATION TEMPERATURE (°C) | 5-35 | 5-35 | 5-35 | 5-35 |
| READY TO USE AFTER MIXING | approx. 45 minutes (for mixing ratio) 0,24 l/kg) approx. 75 minutes (for mixing ratio 0,3 l/kg) |
approx. 4 hours | approx. 4 hours | approx. 4 hours |
| OPEN TIME (min) | >20 | >30 | >30 | >30 |
| FLOOR ACCESS / GROUTINGF (h) | after 2 | after 12 | after 12 | sfter 12 |
| FULL OPERATION LOAD - FOOT TRAFFIC (h) | 2-6 | 3 | 3 | 3 |
| FULL OPERATION LOAD - VEHICLE TRAFFIC (h) | 24 | 14 | 14 | 14 |
| FLOOR HEATING (days) | 7 | 14 | 14 | 14 |
| SHELF LIFE (months) | 12 | 12 | 12 | 12 |
| CLADDING TYPE | ||||
| GLAZED TILES | + | + | + | + |
| TERRACOTA | + | + | + | + |
| PORCELAIN GRES | + | + | + | + |
| LAMINATED GRES | use ultra geoflex | use ultra geoflex | use ultra geoflex | + |
| NATURAL STONE CLADDING (GRANITE, MARBLE, TRAVERTINE, SYENITE, SLATE, etc.) |
+ carry out application test |
+ carry out application test |
+ | + carry out application test |
| CLINKER | + | + | + | + |
| STONEWARE | + | + | + | + |
| CERAMIC MOSAIC | + | + | + | + |
| GLASS MOSAIC | + carry out application test |
+ carry out application test |
+ carry out application test / check tile's producer's guidings |
+ carry out application test |
| GLASS, COLORED, PRINTED TILES | + carry out application test / check tile's producer's guidings |
+ carry out application test / check tile's producer's guidings |
+ carry out application test / check tile's producer's guidings |
+ carry out application test / check tile's producer's guidings |
| CONCRETE / CEMENT MORTAR TILES | + | + | + | + |
| COMPOSITE TILES | use ultra geoflex | use ultra geoflex | use ultra geoflex | + |
| INSULATION AND SOUND ABSORBING panels |
use ultra geoflex | use ultra geoflex | use ultra geoflex | + |
Manufacturer details:
- Atlas sp. z o.o. | Jana Kilińskiego 2 | Łódź 91-421 | Poland | atlas@atlas.com.pl
Type of adhesive:
- Improved cementitious (C2)
- Fast setting (F)
- Reduced slip (T)
Place of assembly:
- Floors
- Walls
- Kitchen, bathroom, laundry, garage
- Terraces
- Balconies, loggias
- Elevations (including insulation systems)
- Cladding of building plinths
- Showers, car washes, etc.
Types of buildings:
- Housing
- Public facilities
- Commercial and service facilities
Type of tile:
- Glazing tiles
- Terracotta
- Gres-porcelain
- Clinker
- Stoneware wall tiles
- Ceramic mosaic
- Concrete tiles, cement mortar tiles
Size of tile:
- up to 0,1 m2
- up to 0,25 m2
Layer thickness:
2 - 15mm
Also bought
